Restoration service
Mold remediation
Mold remediation is containing the affected area, removing moldy porous materials, HEPA-vacuuming and cleaning what remains, and fixing the moisture source. Mold always follows water, so the leak has to be found and stopped or it comes back.
- Fast call-back for active leaks
- Phoenix metro
- Free to call
How the job runs
- 1Inspect and find the moistureMoisture readings and a visual inspection define the affected area and its source.
- 2ContainPlastic containment and negative air pressure keep spores from spreading.
- 3Remove and cleanMoldy drywall, insulation and baseboard are removed; framing is HEPA-vacuumed and cleaned.
Mold in Arizona almost always points to a slow leak: under a sink, behind a shower, from an AC condensate line or a roof that let water in during monsoon season. Dry outdoor air doesn't stop it from growing on damp drywall inside a wall.
Arizona doesn't have a state license specifically for mold remediation, so ask the company about their training and certifications, such as IICRC, and whether they follow the IICRC S520 standard.
Mold remediation at a glance
- Root cause
- Always a moisture source
- Industry standard
- IICRC S520
- DIY limit
- About 10 sq ft on hard surfaces
- Arizona licensing
- No state mold-specific license
Warning signs
Signs you need mold remediation
- Visible dark spotting on drywall, baseboards or under sinks
- A persistent musty smell in one area
- Staining that returns after being cleaned or painted
- Previous leak that wasn't professionally dried
- Warped baseboards or soft drywall near a bathroom
Process
What the restoration company does
- 1
Inspect and find the moisture
Moisture readings and a visual inspection define the affected area and its source.
- 2
Contain
Plastic containment and negative air pressure keep spores from spreading.
- 3
Remove and clean
Moldy drywall, insulation and baseboard are removed; framing is HEPA-vacuumed and cleaned.
- 4
Verify
The area is dried and visually checked; some homeowners hire an independent tester for clearance.
Cost
What affects the cost
Every loss is different, so honest pricing starts with an on-site assessment. These are the factors that move the number.
- Size of the affected area
- Whether mold is inside wall cavities, attics or HVAC
- Containment size and air filtration
- Rebuild after removal
Safe to do now
- Clean small spots (under about 10 square feet) on hard surfaces with detergent and water
- Fix the leak and dry the area
- Wear gloves and an N95 respirator
Stop and call if
- The area is larger than about 10 square feet
- Mold is in the HVAC or inside walls
- Anyone in the home has asthma or a weakened immune system
FAQ
Mold remediation: common questions
Can mold grow in Phoenix if it's so dry?
Yes. Outdoor air is dry, but a leak inside a wall or under a cabinet creates a damp pocket where mold grows within days. Monsoon humidity makes it more likely.
Should I test for mold first?
If you can see mold or smell it near a known leak, testing usually doesn't change the plan. Testing is more useful when you suspect hidden mold or want independent clearance after remediation.
Is bleach enough to kill mold?
Bleach doesn't reach into porous materials like drywall and can leave roots behind. Porous materials with growth are removed; hard surfaces are cleaned with detergent.
Common in these Valley cities
Water where it shouldn't be?
Shut off the water, then call. One call connects you with an independent restoration company near you.
Fast call-back for active leaks