Emergency-capable service
Burst pipe water cleanup
When a pipe bursts, shut off the main water valve, turn off power to wet areas, then get water extracted and drying equipment running the same day. A plumber repairs the pipe; the restoration company handles the water that escaped.
- Fast call-back for active leaks
- Phoenix metro
- Free to call
How the job runs
- 1Shut off and make safeMain water off, power off to wet circuits, and any sagging ceiling drywall is drained or brought down under control.
- 2Repair coordinationA licensed plumber repairs the pipe; restoration can start extraction at the same time.
- 3Open and dryWet insulation is removed, small holes or flood cuts open wall cavities, and drying equipment runs with daily readings.
Burst pipes in the Valley are less about freezing and more about age, pressure and hard water. Pinhole leaks in copper, failed braided supply lines under sinks and toilets, and fittings in attic runs are common sources. The rare hard freeze does split exposed pipes and backflow devices on the outside of homes.
Pipes in attics and ceilings are the costly ones: water collects on top of drywall ceilings and spreads before it drips. If a ceiling is bulging, stay out from under it.
Burst pipe water cleanup at a glance
- First step
- Close the main water valve
- Common Valley causes
- Pinhole leaks, supply lines, attic fittings
- Pipe repair
- Licensed plumber
- Water cleanup
- Restoration company
Warning signs
Signs you need burst pipe water cleanup
- Hissing or running-water sounds with every fixture off
- Water meter still moving with no water in use
- Ceiling stains, sagging drywall or water dripping from light fixtures
- Sudden drop in water pressure
- Wet drywall near a sink, toilet or water heater
Process
What the restoration company does
- 1
Shut off and make safe
Main water off, power off to wet circuits, and any sagging ceiling drywall is drained or brought down under control.
- 2
Repair coordination
A licensed plumber repairs the pipe; restoration can start extraction at the same time.
- 3
Open and dry
Wet insulation is removed, small holes or flood cuts open wall cavities, and drying equipment runs with daily readings.
- 4
Rebuild
Drywall, texture, paint and flooring are replaced once materials read dry.
Cost
What affects the cost
Every loss is different, so honest pricing starts with an on-site assessment. These are the factors that move the number.
- Where the pipe was: attic and ceiling leaks spread further than under-sink leaks
- How long the water ran before shutoff
- Amount of ceiling and wall drywall to remove
- Insulation and texture matching during repairs
Safe to do now
- Shut off the main water valve
- Open faucets to drain the lines
- Poke a small hole in a bulging ceiling with a bucket underneath, from the side, if it's safe
Stop and call if
- Water is running near a ceiling light or fan
- The ceiling is sagging more than an inch
- You can't find or close the main shutoff
FAQ
Burst pipe water cleanup: common questions
Do pipes really freeze in Phoenix?
Rarely, but it happens during hard freezes. Exposed pipes, pool equipment and backflow preventers on the outside of homes are the most vulnerable. Most Valley burst-pipe calls come from age, pressure or failed supply lines instead.
Who fixes the pipe, the plumber or the restoration company?
A licensed plumber repairs the pipe. The restoration company extracts water, dries the structure and handles removal and rebuild. Many homeowners call both at once.
Common in these Valley cities
Water where it shouldn't be?
Shut off the water, then call. One call connects you with an independent restoration company near you.
Fast call-back for active leaks